Forums GAMERGEN

Peut on DOWNGRADER avec une PS3KEY, ou est ce que le produit de ps downgrad est compatible avec la PS3KEY.

Salut je suis content de vous l'annoncer la news de la team et sortie a prendre avec des pincettes car se fichier ne viens pa de source sur dsl mais le fichier .fla et bien allez faite vous plaize je vous laisse le liens : http://www.multiupload.com/J75WYSY45M Tenez moi courant je vais surement faire le test ce soir je vous dirais se qu'il en est a plus source psx scene

How to Install/ Use PS Updater

Installation

Step 1 - Download PS Updater
Step 2 - Click start button and type in the search bar UAC and click on User Account Control Settings listed above. Inside this menu please lower the settings to lowest priority, Save and restart the computer.
Step 3 - Unrar/Unzip and click on setup.exe
Step 4 - follow the steps by clicking next until you reach the point of setup where it asks you to plug in your device
Step 5 - plus in PS Jailbreak device and click next
Step 6 - choose Unknown Device #1 from the list and click next
Step 7 - click save to save the .ini file under the place it wants
Step 8 - Click install driver and now complete installation



USE

Step 1 - Open PS Updater application that install a shortcut on your desktop
Step 2 - Plug in PS Jailbreak and click My Serial (make sure it can recognize and find your serial number)
Step 3 - Click My coupons and enter the coupon code you received from your authorized reseller when purchasing PS Downgrader.
Step 4 - Save the download it prompts you with ( You will receive 2 files , a) Program (which is PS Jailbreak) and b) Downgrade (which is your downgrader)
Step 5 - Go install file choose the Downgrader file and click Update now
Step 6- After using PS Downgrade to lower your firmware please follow the above steps this time choosing to update file a) Program
Step 7 - Now your PS Jailbreak is back to a Modchip



Downgrader
requirement - PS Jailbreak USB Dongle , PS Downgrade Coupon that has been installed onto your PS Jailbreak Device, Modified 3.41 PUP , LV2Diag.self (file 1) and LV2Diag.self (file 2)


Step 1 - Insert PS Jailbreak device that has been reprogrammed as PS Downgrade into your console
Step 2 - Turn on console using same boot method as PS Jailbreak - Press Power then immediately press eject. You will see your console turn with PS Jailbreak lit up with red/green light followed by green only, Then it will turn off.
Step 3 - Turn on console to make sure you are in factory service mode. You will see a huge red box on the screen saying Factory Service Mode, once confirmed please turn off console and remove PS Downgrade Dongle
Step 4 - Program any blank usb with 2 files , A) modified 3.41 pup B) Lv2Diag.self (file 1) These must be the only files on the usb key and must be placed in the main directory of the flash drive.
Step 5 - Insert this new Flash drive into the right USB PORT of your console ( It must be placed in the outermost right port) and turn the console on. You will see black screen but you will see flashing lights on the console (yellow) and on your USB key
Step 6 - Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
Step 7 - Remove the usb key and turn on the console , you will still be in factory service mode. Please verify you have downgraded successfully to version 3.41
Step 8 (Optional) - If you wish to downgrade to any older firmware you can not follow step 4,5,6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41)
Step 9 - Insert flash drive back into PC , remove the PUP and Lv2Diag.self and install only LV2Diag.self (file 2) on the USB Flash Drive
Step 10 - Power on your console, after 10 seconds it will power off
Step 11 - Turn on your console with no USB inserted and you will be out of factory service mode into retail mode with your chosen firmware version installed.

JAilbreak your console and enjoy playing homebrew

donc ......

dommage qu'il essaye de tout faire pour downgrader, alors que le mieux serait d'arriver a utiliser le Ps jailbreak avec le FW 3.50

C le bon pr le downgrade il manque juste 2 fichier appaprament ms c bon c le fichier hexa de la team psjb !!!!!!!!

Je pige pas vraiment la news de psjailbreak.com. Google trad. traduit a l'envers T_T.

Donc pour faire fonctionner le PSjailbreak il faut utiliser le PSdowngrade. On dois acheter, en plus du PSjailbreak, le PSdowngrade. Est-ce bien sa ?

RoRo026 Wrote:Oui si tu es en 3.50 comme moi, en principe il faut que tu possède un PSJB original, les clones c mort et donc là si t'en est en possession de ce dernier t'a juste à obtenir le fichier de mise à jour payant sur le site PS Downgrade pour l'implanter dans le PSJB mais il faut bien un PSJB + le PS Downgrade pour revenir en 3.41...

Je donne même pas un jours à la scène PSGroove pour dumper le binse, et nous le mettre en open source donc gratis pour nos EEPROM, voir deux jours au pire.

40$ pour un truc à usage unique il faut vraiment vouloir que son an*s resemble à la manche d'un magicien.