Forums GAMERGEN

Bonjour,

j'ai souvent cette meme erreur qui se repete a l'infini lors de la gravure :
"logical unit communcation time out"

mais qu'est ce que ca veut dire ?

je suis sous Windows 7 x64 Edition
j'ai un lecteur ATAPI iHAS524 B AL2A (F:) (ATA)
avec le dernier firmware AL2A
j'ai imgburn Version 2.5.7.0

je grave en 2.4x et 4x avec des verbatim MKM-003-00
j'ai mis les options
Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
layerbreak sur calclulate optimal

et patcher chaque iso avec la derniere version abgx
j'ai regler tous ce qui faut je crois


ca fait peut etre le 20eme dvd que je rate.
je commence a croire que j'ai la poisse....



Avez vous une quelcquonque solution à ce curieux probleme

merci d'avance,

cordialement,
Ninjaa



voila un screenshot de l'erreur


voici le log :
I 23:07:39 ImgBurn Version 2.5.7.0 started!
I 23:07:39 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 23:07:39 Total Physical Memory: 3 145 272 KB - Available: 1 478 836 KB
I 23:07:40 Initialising SPTI...
I 23:07:40 Searching for SCSI / ATAPI devices...
I 23:07:40 -> Drive 1 - Info: DTSOFT BDROM 1.05 (H:) (Virtual)
I 23:07:40 -> Drive 2 - Info: DTSOFT BDROM 1.05 (I:) (Virtual)
I 23:07:40 -> Drive 3 - Info: ATAPI iHAS524 B AL2A (F:) (ATA)
I 23:07:40 Found 1 DVD±RW/RAM and 2 BD-ROMs!
I 23:10:36 Operation Started!
I 23:10:36 Source File: N:\X360\metalgear
I 23:10:36 Source File Sectors: 4 267 015 (MODE1/2048)
I 23:10:36 Source File Size: 8 738 846 720 bytes
I 23:10:36 Source File Volume Identifier: DVD_ROM
I 23:10:36 Source File Volume Set Identifier: 9ad30000MS UDFBridge
I 23:10:36 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 23:10:36 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 23:10:36 Source File File System(s): ISO9660; UDF (1.50)
I 23:10:36 Destination Device: [2:0:0] ATAPI iHAS524 B AL2A (F:) (ATA)
I 23:10:36 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 23:10:36 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x
I 23:10:36 Destination Media Sectors: 4 267 040
I 23:10:37 Write Mode: DVD
I 23:10:37 Write Type: DAO
I 23:10:37 Write Speed: 4x
I 23:10:37 DVD+R DL Reserve Track: No
I 23:10:37 Link Size: Auto
I 23:10:37 Lock Volume: Yes
I 23:10:37 Test Mode: No
I 23:10:37 OPC: No
I 23:10:37 BURN-Proof: Enabled
I 23:10:37 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)
I 23:10:37 Book Type Setting: DVD-ROM
I 23:10:37 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 23:10:37 Optimal L0 Data Zone Capacity: 2 133 520
I 23:10:37 Optimal L0 Data Zone Method: Copied From Original Disc
I 23:11:07 Set L0 Data Zone Capacity Succeeded!
I 23:11:09 Filling Buffer... (40 MB)
I 23:11:09 Writing LeadIn...
I 23:11:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 23:11:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 23:11:12 Writing Layer 0... (LBA: 0 - 2133519)
W 23:17:19 Failed to Write Sectors 984160 - 984191 - Reason: Logical Unit Communication Time-Out
W 23:17:19 Retrying (1 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (2 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (3 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (4 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (5 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (6 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (7 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (8 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (9 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (10 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (11 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (12 of 20)...
W 23:17:23 Retry Failed - Reason: Invalid Address For Write
W 23:17:23 Retrying (13 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (14 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (15 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (16 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (17 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (18 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (19 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:17:24 Retrying (20 of 20)...
W 23:17:24 Retry Failed - Reason: Invalid Address For Write
W 23:18:23 Retrying (21)...
W 23:18:23 Retry Failed - Reason: Invalid Address For Write
W 23:18:24 Retrying (22)...
W 23:18:24 Retry Failed - Reason: Invalid Address For Write
E 23:18:25 Failed to Write Sectors 984160 - 984191 - Reason: Logical Unit Communication Time-Out
E 23:18:25 Next Writable Address: 984176
I 23:18:25 Synchronising Cache...
W 23:18:33 User opted to skip the 'Close Track/Session/Disc' functions.
E 23:18:33 Failed to Write Image!
I 23:18:33 Exporting Graph Data...
I 23:18:33 Graph Data File: C:\Users\CONNARD\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_MERCREDI-1-MAI-2013_23-10_MKM-003-00_4x.ibg
I 23:18:33 Export Successfully Completed!
E 23:18:33 Operation Failed! - Duration: 00:07:56
I 23:18:33 Average Write Rate: 4 545 KB/s (3.3x) - Maximum Write Rate: 5 631 KB/s (4.1x)

Bonjour,

Il faut que tu flashes ton graveur avec l'iXtreme Burner ou que tu utilises le logiciel BurnerMax.

ok je vais essayer ça je vous dit

merci

voila j'ai essayer burnermax, et j'ai aussi la derniere mise a jour de l'iXtreme burner
mais ça marche toujours pas, je ne sais pas ce qui cloche

log :
I 00:36:58 ImgBurn Version 2.5.7.0 started!
I 00:36:58 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:36:58 Total Physical Memory: 3 145 272 KB - Available: 1 864 964 KB
I 00:36:58 Initialising SPTI...
I 00:36:58 Searching for SCSI / ATAPI devices...
I 00:36:58 -> Drive 1 - Info: DTSOFT BDROM 1.05 (H:) (Virtual)
I 00:36:58 -> Drive 2 - Info: DTSOFT BDROM 1.05 (I:) (Virtual)
I 00:36:58 -> Drive 3 - Info: ATAPI iHAS524 B AL2A (F:) (ATA)
I 00:36:58 Found 1 DVD±RW/RAM and 2 BD-ROMs!
I 00:46:46 Operation Started!
I 00:46:46 Source File: N:\X360\metalgear_revengeance\Metal.Gear.Rising.Revengeance.XBOX360-MARVEL\mvl-mgrr.dvd
I 00:46:46 Source File Sectors: 4 267 015 (MODE1/2048)
I 00:46:46 Source File Size: 8 738 846 720 bytes
I 00:46:46 Source File Volume Identifier: DVD_ROM
I 00:46:46 Source File Volume Set Identifier: 9ad30000MS UDFBridge
I 00:46:46 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 00:46:46 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 00:46:46 Source File File System(s): ISO9660; UDF (1.50)
I 00:46:46 Destination Device: [2:0:0] ATAPI iHAS524 B AL2A (F:) (ATA)
I 00:46:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 00:46:46 Destination Media Supported Write Speeds: 2,4x; 4x; 6x; 8x
I 00:46:46 Destination Media Sectors: 4 267 040
I 00:46:46 Write Mode: DVD
I 00:46:46 Write Type: DAO
I 00:46:46 Write Speed: 4x
I 00:46:46 DVD+R DL Reserve Track: No
I 00:46:46 Link Size: Auto
I 00:46:46 Lock Volume: Yes
I 00:46:46 Test Mode: No
I 00:46:46 OPC: No
I 00:46:46 BURN-Proof: Enabled
I 00:46:46 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)
I 00:46:46 Book Type Setting: DVD-ROM
I 00:46:46 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 00:46:46 Optimal L0 Data Zone Capacity: 2 133 520
I 00:46:46 Optimal L0 Data Zone Method: Copied From Original Disc
I 00:46:46 Set L0 Data Zone Capacity Succeeded!
I 00:46:48 Filling Buffer... (40 MB)
I 00:46:49 Writing LeadIn...
I 00:47:20 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 00:47:20 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 00:47:20 Writing Layer 0... (LBA: 0 - 2133519)
W 00:47:24 Failed to Write Sectors 11296 - 11327 - Reason: Logical Unit Communication Time-Out
W 00:47:24 Retrying (1 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (2 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (3 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (4 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (5 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (6 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (7 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (8 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (9 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (10 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (11 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (12 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (13 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (14 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (15 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (16 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (17 of 20)...
W 00:47:27 Retry Failed - Reason: Invalid Address For Write
W 00:47:27 Retrying (18 of 20)...
W 00:47:28 Retry Failed - Reason: Invalid Address For Write
W 00:47:28 Retrying (19 of 20)...
W 00:47:28 Retry Failed - Reason: Invalid Address For Write
W 00:47:28 Retrying (20 of 20)...
W 00:47:28 Retry Failed - Reason: Invalid Address For Write
W 00:47:46 Retrying (21)...
W 00:47:46 Retry Failed - Reason: Invalid Address For Write
E 00:47:47 Failed to Write Sectors 11296 - 11327 - Reason: Logical Unit Communication Time-Out
E 00:47:47 Next Writable Address: 11312
I 00:47:47 Synchronising Cache...
W 00:47:56 User opted to skip the 'Close Track/Session/Disc' functions.
E 00:47:56 Failed to Write Image!
I 00:47:56 Exporting Graph Data...
I 00:47:57 Graph Data File: C:\Users\CONNARD\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS524_B_AL2A_LUNDI-6-MAI-2013_00-46_MKM-003-00_4x.ibg
I 00:47:57 Export Successfully Completed!
E 00:47:57 Operation Failed! - Duration: 00:01:10
I 00:47:57 Average Write Rate: 868 KB/s (0.6x) - Maximum Write Rate: 3 105 KB/s (2.2x)

ninjaa Wrote:Bonjour,
j'ai mis les options
Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes

Salut,

Tu devrais ré-essayer en mettant tout en "YES" même si certains tutos de configurations préconisent autre chose.

Pour info ton graveur est branché comment sur ton PC ? Sur un port SATA de la carte mère ou en externe ?

Si tu grave en 4x comme sur l'exemple, il faut activer "OPC avant écriture" (même si je ne pense pas que c'est l'origine du problème qui me semble plus matériel que soft).

Il me semble que Smark avait posté un problème identique et que le problème avait été résolu en changeant d'ordi.. Si il pouvait confirmé

EDIT : J'ai retrouvé le topic mais c'est pas exactement le même problème :
http://www.xboxgen.fr/forums/disque-illisible-avec-ihas-t41079.html

Salut,

Tu devrais ré-essayer en mettant tout en "YES" même si certains tutos de configurations préconisent autre chose.

oui , j'ai déjà mis en YES partout, mais ça plantait quand même.

Pour info ton graveur est branché comment sur ton PC ? Sur un port SATA de la carte mère ou en externe ?

Je l'ai brancher en sata, et pas en externe
et j'ai aussi graver avec/sans OPC check, ca change rien.
j'ai vue sur d'autre site, qu'il fallait le mettre en master. mais j'ai qu'un seul graveur.
faudrai que je voie s'il est en slave.

Il me semble que Smark avait posté un problème identique et que le problème avait été résolu en changeant d'ordi..

ahah, j'adorerai changer de pc, mais c'est pas possible pour le moment.

quelqu'un a-t-il une meilleur solution que de changer de pc svp ??

Essai tout simplement un autre port SATA.

Yes enfin, j'ai reussi !!miracle

après 25 dvd ruinés, j'ai enfin trouver la solution
qui en fait, est plus simple que je ne le croyais.... -_-

J'ai donc, regarder les port sata de toutes me connections, puis j'ai décider de mettre un peu d'ordre dedans.
j'ai brancher le disque C: sur le premier port, puis les autres disque dur dans l'ordre, avec le liteon ihas en dernier

et puis j'ai trouver ce lien vachement sympas pour savoir ce que veut dire tel ou tel error code :
http://www.cdr-zone.com/articles/atapi_error_codes_page_1.html


Et voila, le tour est joué ! il marche du tonnerre !!

Merci a vous tous pour vos aide, ça m'a bien aider a chercher des solutions



cordialement,
ninjaa

Bonjour,

Donc c'était bien une histoire de port SATA.. Je passe le sujet en résolu.

Bon jeu