Comme demandé, j'ai utilisé pathkey et la mis le probe CK3 sur la borne : j'ai obtenu les différents fichiers dummy - identify- inquiry - key,serial mais lors de mon dernier essai je ne recois que le dummy ? Est-ce que cela provient de cela ?
Voila le log du dernier essai
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Spoofing Target
DVD Key already matches
ID strings already match
Serial data already matches
Sending Lite-On-Erase request to port 0xC000
..............
Drive returned Status 0xD0
........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xC000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xC000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0xC000
Drive is Lite-On..
Key found in KeyDB at record (2 - firmware)
Key is: 2894726678500C30ECAFxxxxxxxxxxx
Key has been tested and verified, thanks C4eva !